Andy Golz from Duluth (MN) Rescue 1 sent in this idea for simple chain storage. They were not happy with their previous set-up using old O2 bags for the chains, so they set out to find a better solution. They found a few empty foam containers and cut the tops off with a reciprocating saw. Once the top was removed a few holes were drilled about two inches from the top of the container. A few out-of-service prussik cords were used to form the handle secured to the container with a barrel or scaffold knot. Before securing the second side of either prussik, the cord was run through a five inch section of garden hose to complete the handle. Hanging the hooks on the top edge of the container makes them easy to find, and prevents the chain from getting tangled.
I like it. We use old ammo cans, but some times the can is too small for the length of chain we are trying to cram into it. This would help prevent that.
I like your chain idea, you could also marry you step checks (lock them together) and free up some shelf space.
good to hear from the Duluth boys
our ladder truck uses commandeered grocery store handbaskets.
5 Chains, 1 Bucket
What particular use does the chains give?? Rescue?? I come from an engine company and have never seen these used in NJ
We typically use the chains in conjunction with our winch or our struts, normally to stabilize or move a vehicle during an auto extrication.
I hate it when the can is too small….
The bigeasy, most departments in NJ use 2†or 4†ratchet straps with a few chains 2†ratchet straps working load are around 3,000 lbs range. Both have their pros and cons
i use rope because its lighter chain is too heavy
Chuck we heard that about you (LITEWEIGHT).
I can still hear you saying you will never break the chain.
I would suggest painting the hooks different colors if you have different lengths we used green for 20′ yellow for 15′ and red for 10′ just so you can quickly see what your getting.